Cart Contents (2)CheckoutMy Account


Hanna PRIMO TDS Tester

Hanna PRIMO TDS Tester
The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.

Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it off after 5 minutes of inactivity.

Primo is supplied complete with batteries, instructions and 1 packet of 1382 ppm TDS solution (mg/L) @ 25¦C, 20 ml



1999 ppm (mg/L) Resolution

1 ppm (mg/L) Accuracy

(@20¦C/68¦F) ¦2% Full Scale pH Calibration

Automatic at 1382 ppm Temp. Compensation

Automatic, from 0 to 60¦C (32 to 140¦F) Battery Type / Life

2 x 1.4V, 200 hours of continuous use Environment

0 to 50¦C (32 to 122¦F); RH 90% Dimensions

180 x 50 x 25mm (7 x 2 x 1") Weight

80 g (2.9 oz.)

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Manufacturer Info
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg